Image of DURAG D-R 220T visibility monitor

Durag D-R 220T Visibility Monitor

DURAG’s D-R 220T Visibility Monitor uses the optical transmission principle to monitor visibility for ventilation control or fire alarm systems in tunnels. It provides reliable measurement parallel to the tunnel axis. Key Benefits Measurement parallel to tunnel axis, continuous measurement Measurement along a distance of 10m, no spot measurement Corrosion resistant against tunnel atmosphere Determination […]

Durag D-R 220T Visibility Monitor Read More »

Enotec Comtec 6000 DustEx

Enotec Comtec 6000 DustEx

COMTEC® 6000 DustEx provides permanent and reliable gas analysis in Ex zones 21/22 with high dust loads. The DustEx probe is robust and designed to withstand the abrasive forces of high dust atmospheres.   Information The COMTEC® 6000 DustEx is the standard InSitu analyzer system for use in dust explosion zones 21/22 In accordance to the tough demands

Enotec Comtec 6000 DustEx Read More »

Silotec 8000 allows fast, reliable, safe analysis of oxygen, carbon monoxide and methane for ATEX zone 20 in silos and other dusty atmospheres at risk of explosion.

Enotec Silotec 8000

The SILOTEC® 8000 – fast and reliable safety monitoring for ATEX Zone 20 in silos and other potentially explosive dust atmospheres. Information The SILOTEC® 8000 allows fast, reliable, safe analysis of oxygen, carbon monoxide and methane for ATEX* zone 20 in silos and other dusty atmospheres at risk of explosion. The simultaneous measurement of O2 and CO allows smouldering fires to be

Enotec Silotec 8000 Read More »

Enotec Aquatec 2000

Enotec Aquatec 2000

AQUATEC® 2000 is the only InSitu O2/H2O analyzer in combination with emissions analyzer systems for all types of combustion. Information AQUATEC® 2000 measures moisture and oxygen in flue gases or other non combustible gases. The measuring system consists of two serially installed, tried and proven gas sensors, in use throughout the world. The wet process gas measured

Enotec Aquatec 2000 Read More »

Enotec Ensitu 7000

Enotec Ensitu 7000

ENSITU® 7000, a cost-effective O2 transmitter probe Enotec’s ENSITU® 7000 O2 transmitter probe is ideal for process control for small to medium sized boilers that uses fuels such as gas, oil and coal. Versatile and robust, the ENSITU® 7000 is able to withstand high flue gas temperatures up to 600°C and high dust loads, and deliver

Enotec Ensitu 7000 Read More »

Enotec CEMTEC

Enotec CEMTEC

CEMTEC® has self-cleaning properties and unparalleled mechanical strength for continuous measurement for pyro process optimization in cement plants. Information The CEMTEC® gas sampling probe system was developed for continuous analysis of flue gas in cement plant rotary kiln inlets and other extremely dusty, high temperature processes such as in lime plants with the goal of increasing product quality with

Enotec CEMTEC Read More »

Enotec Comtec 600E

Enotec Comtec 600E

O2 and combustibles can be measured in wet or dry process gas with a detection limit of 1 ppm, also in combination with an ENOTEC gas sampling and conditioning system. Information COMTEC® 600E is an extractive gas analyzer for measurement of oxygen and COe (the sum of unburned molecules such as carbon monoxide, methane or hydrogen). Apart from the MXP sensor

Enotec Comtec 600E Read More »

Enotec Comtec 6000 GasEx

Enotec Comtec 6000 GasEx

The COMTEC® 6000 GasEx is an Ex protected analyzer for safe measurement of oxygen and combustibles in gas hazardous environments (gas explosion zones 1 and 2). Information The explosion protected gas analyzer COMTEC® 6000 GasEx reacts immediately to process gas changes and is ideal for safe and exact measurements of oxygen and COe in refineries or similar areas with explosion hazards (Gas

Enotec Comtec 6000 GasEx Read More »

Enotec Comtec 6000

Enotec Comtec 6000

COMTEC® 6000 is the world’s first InSitu analyzer for measurement of oxygen and combustibles in flue and process gases for optimal combustion control. Information The COMTEC® 6000 is an InSitu analyzer for measurement of O2 and COe (sum of unburned molecules – CO, H2, CxHy) in flue and process gases. The correlation of the O2 and COe measurements enables combustion fine tuning in real time.

Enotec Comtec 6000 Read More »

Enotec Oxitec 500E

Enotec Oxitec 500E

Reliable extractive wet or dry O2 analyzer for 19″ rack installations. Information The OXITEC® 500E extractive analyzer contains the same sensor technology used in the proven OXITEC® 5000 InSitu oxygen analyzer. In combination with an ENOTEC gas sampling and conditioning system, the OXITEC® 500E measures oxygen content wet or dry flue gas with a detection

Enotec Oxitec 500E Read More »