The explosion protected gas analyzer COMTEC® 6000 GasEx reacts immediately to process gas changes and is ideal for safe and exact measurements of oxygen and COe in refineries or similar areas with explosion hazards (Gas Ex zones 1 / 2).
The COMTEC® 6000 GasEx fast flue gas analyzers are ATEX (II 2G Ex d IIC T3/T6 Gb) certified by a German test institute whereby the certifications encompasses the complete analyzer, including parts in contact with process gas. This certification builds trust in plant security. This is coupled with ENOTEC’s compelling product quality, which is continually able to withstand the challenge of aggressive process conditions.
|Insertion depth of probe||430 mm
|O2 / COeranges||0 – 25 % O2
0 to 1000 ppm COe
(others on request)
|Sensor accuracy O2||better 0,2% of measured value|
|Sensor accuracy COe||better 5% of range end|
|Reaction time||0,5 s
(process flow velocity > 10 m/sec.)
|Process gas temperature||up to 500 °C
up to 1400 °C
(with cooling protection tube)
|Ambient temperature||-20 °C to 80 °C (probe)
-20 °C to 55 °C (electronic unit)
|Interface||HART, FIELDBUS, RS485, MODBUS RTU,
RS232, ENOTEC REMOTE
|IP code||IP66 (probe)
IP66 (electronic unit)
Hello there, I'm Sara I started working at TES in the Sydney office in early 2017 and have recently moved to Perth to look after the WA/SA/NT Regions. I also look after our Process equipment sales. If there is anything I can help you with please don't hesitate to call me on 0432 381 045 or send me a message and myself or your local sales support will be in touch shortly!