Skip to Content
  1. All products
  2. CEMS
  3. Gas Sampling Probes & Conditioning Systems
  4. DXG RGA-60
  5. Gas Sampling Probes & Conditioning Systems
Pricelist: Default AUD Pricelist Pricelist
Pricelist: Default AUD Pricelist Pricelist
DXG RGA-60

DXG RGA-60

Features

  • Utilizes tunable diode laser (TDL) technology to scan a narrow wavelength range, unaffected by gases other than CO
  • Semi-permanent use without light source replacement using a laser light source
  • Enables standard gas calibration with calibration filters
  • Incorporates SUS material in calibration filters to prevent damage from duct-related particles like dust and sand

System Components

  • Main Unit / Probe / Power Distribution Panel
  • Master Flange / Cables

Options

  • Probe Protector / Teflon Coated Probe
  • IP66 or NEMA 4X
  • Regulator & Valve / Calibration Gas / Compressure

Data Sheets

Download Data Sheet     


$ 0.00 $ 0.00
$ 0.00


  • CEMS
Add to cart
Contact Us
CEMS: Flue Gas

Technical Specifications
Measured ComponentsCO
Measurement PrinciplesTDLS (Tunable Diode Laser Spectroscopy)
Measuring Ranges0 ~ 3000 ppm
Min. Measuring Unit0.1 ppm
Zero Drift (168 hours)< ± 1 % FS
Span Drift (168 hours)< ± 1 % FS
Repeatability< ± 2 % FS
Linearity< ± 2 % FS
Response Time< 5 seconds
Measurement Conditions
Operating Temperature-20 ~ +55 ℃
Gas Temperature< +450 °C
Communication
Analog Outputs2 Channel, 4 ~ 20 mA
Digital Outputs4 Channel
Digital Inputs2 Channel
Display & Input Device7 inch LCD Monitor (Touch Screen) / USB
InterfaceRS232, 422, 485 / LAN (Ethernet) / Hart
Dimension & Power Supply
DimensionsW 300 x D 380 x H 420 mm
Weight20 kg
Enclosure RatingIP 65 (IP 66)
Voltage110 / 220 VAC, 50 / 60 Hz
Power Consumption500 W
Probe
MaterialsSUS 316 L or SUS 316 Ti
Length0.5 m ~ 2.5 m
Measuring Section Length500 mm
Weight1.5 m : 20 kg
2.0 m : 25 kg
Gas Flow Rate> 1 m /s
Instrument AirNecessary
Temp. SensorPT 1000
IA (Instrument Air) Consumption
Analyzer0.5 m³/h